A proud father posted on Facebook that his daughter worked to create an eerie skeleton ghost statue, a striking addition to their Halloween decorations.
The project started with a sturdy foam food shipping carton as the base, providing a solid foundation for the structure. The skeleton itself was a standard posable skeleton prop, reinforced at the joints with copper grounding wire secured with zip ties. To add a spectral appearance, a queen-size grey sheet was soaked in watered-down Modge Podge and carefully draped over the skeleton.The daughter played a key role in shaping the ghostly figure, using paper clips and binder clips to hold the fabric in place as it dried. Once set, another coat of Modge Podge was applied using a pump sprayer to enhance its durability. The foam base was meticulously carved with a soldering iron to create a brick-like texture, while Super 90 spray glue was used in select areas to erode the foam slightly for an aged, weathered look. A middle ring from the skeleton’s chest was repurposed and glued to the bottom to reduce its resemblance to an ice chest—a clever adjustment.
To ensure the structure could withstand the elements, thick layers of primer and black spray paint were applied, followed by a protective coat of urethane to make it rainproof. For stability, a cinder block was affixed inside the base, making the statue bottom-heavy and secure.
In the end, the project took around two hours to complete, excluding drying time, and cost approximately $70. Standing just under seven feet tall and weighing about 30 pounds, the finished skeleton ghost was an impressive testament to their teamwork and creativity, bringing a haunting presence to their Halloween display.
Source: Facebook Post
0 Comments